With the USBCopy or SDCopy function, you can press the Copy button on your DiskStation to. For example I can send fake subnet 192.168.43.0/24 to remote users (so it does not overlap with their LAN) and then map it to real 192.168.1.0/24 via ip nat inside source static network 192.168.1.0 192.168.43.0 255.255.255.0. Publish your DiskStation to the Internet via ezCloud.
#Easyvpn network extension duplicat subnets Pc
In order to avoid the network conflicts on the OpenVPN server there are not the routing rule for the remote sites, there is a specific lookup routing table for each PC like that: # ip rule shġ0: from all to 10.10.10.0/24 lookup mainĪnd under each # ip route show table 1024ġ92.168.80.0/24 via 10.10.10. Your provided configuration is forwarding ports, while I need static NAT mapping 1:1 for whole /24. This setup works perfectly while using TAP device. This document provides information on configuring and monitoring the Cisco Easy VPN Remote feature to create IPsec Virtual Private Network (VPN) tunnels between a supported router and an Easy VPN server (Cisco IOS router, VPN 3000 concentrator, or Cisco PIX Firewall) that supports this form of IPsec encryption and decryption. Delete your current DHCP scope and open the txt file with notepad, press Control+H and replace Dhcp Server with netsh dhcp server. The PC1 connect to RemoteSite1 and the PC2 connect to RemoteSite2 but while using iroute one of the PCs reach the wrong remote site. I have some issue with an OpenVPN concentrator while using TUN device.
0 kommentar(er)
